Macros

<< Click to Display Table of Contents >>

Navigation:  CommCat Mobile >

Macros

The CommCat Mobile Tuner window has 8 rows of 4 macro buttons (32 total). The CW Keyer has 16 macros,shared with the first sixteen in the Tuner. You can use macros to send CW messages and remote commands. CW Macros, Tune, Radio Control, and Rotor control are not available for QSXer/HRD users, but are available if you are user native QSXer rig control..

 

Programming Macros

 

Macros and their associated button captions are entered in CommCat Mobile Settings in the Macros section.

 

The first character in a macro indicates the action to be taken.

 

$

Literal characters sent as CW

*

Radio Control described below

!

Special commands described below

none

CommCat macro having the same macro number as defined in CommCat CW settings is sent

 

For example,

 

$CQ CQ CQ DE W6HN

 

causes CommCat to send

 

CQ CQ CQ DE W6HN

 

in CW.

 

Radio '*' commands allow you to send custom control messages to your radio.  Radio control macros can include functions such as power on/off, antenna tuner, or antenna select.

 

These commands are one-way.  Radios often send a response to a command, and these return responses are ignored by QSXer.  For example, it is not possible to request the frequency for VFO A through the use of a macro.

 

Many radios use hex numbers for commands.  For these radios, enclose each hex number by greater than/less than symbols.

 

Icom Example 

 

To tune the Icom IC-7800 Antenna Tuner, the command is 1C-01-03.  Each 2-character pair is a hex number. The entire command is:

 

FE-FE-6A-E0-1C-01-03-FD

 

These are all hex numbers.  You can see the Antenna Tuner command in there, which is taken from the IC-7800 manual.  The entire string of hex digits must be sent to the radio.

 

CommCat Mobile has a special way to represent hex digits.  FE should be entered <FE>, and so on.  The entire string must be preceded by an asterisk.  So the command to start the antenna tuner in the radio would be:

 

*<FE><FE><6A><E0><1C><01><03><FD>

 

Open the macro settings in CommCat Mobile and find an unused macro slot.  Enter the name ‘A-Tune’ in the name box, and the command string into the macro box.

 

If you wish to add multiple commands in a single macro, simply append one macro to the previous one, without using an asterisk.

 

Elecraft K3 Examples

 

Mike, N6MQL, uses the following radio macros for his K3:

 

CQ (K3 memory 2)

*SWT31;

APF

*SWH29;

PRE

*SWT24;

ATT

*SWH24;

ANT 1/2

*SWT26;

RIT On/Off

*SWT45;SWT53;

RIT Up

*RU;

RIT Down

*RD;

XFL

*SWT29;

NR

*SWT34;

NB

*SWT33;

RF Gain 100%

*RG255;

ATU Tune

*SWT19;

 

Kenwood TS-2000

 

Dave, K5OZ, uses these macros for his Kenwood TS-2000:

 

Ant-1

*AN1;

Ant-2

*AN2;

Ant Tune

*AC111;

Rig On

*PS1;

Rig Off

*PS0;

100W

*PC100;

5W

*PC005;

147.270 MHz (see note)

*FA00147270000;MD4;CN16;

444.100 MHz (see note)

*FA00444100000;MD4;CN16;

444.425 MHz (see note)

*FA00444425000;MD4;CN16;

 

Note: The macro sets frequency, FM mode, and 114.8 PL tone.  The radio is already set for automatic repeater offset.

 

Special '!' commands that can be sent using a macro key include the following:

 

!KEYER

Opens the iPhone keyboard so you can send CW manually

!ESC

Stops a CW message that is being transmitted

!T/R

Toggles Transmit/Receive (works with HRD)

!TUNE        

Keys the transmitter while you hold your finger on the macro button

!ROTOR

Turn your station rotor to the DX bearing (not available with QSXer)

!RTR STOP

Stop rotor immediately (not avaialble with QSXer)

!SKYPE

Starts Skype for 2-way audio. Enter the command with a Skype name or telephone number. !SKYPE:w6hnradio or !SKYPE:+17075551234. If you are using CommCat Live  and have enable VoIP, tap the Audio button to start and end the connection.

 

Special CW keying characters that can be used in a macro (prefaced by $):

 

Char

Result

'*

Your call sign (apostrophe + asterisk)

'X

DX call

@ or 'A

AR

+

AA

'B

BK (apostrophe + B)

- or _

BT ( dash or underscore)

'C

CL (apostrophe + C)

'E

"dit space dit" (as in "two bits")

# or 'K

KN (pound sign or apostrophe + K)

[ or 'S

SK (left bracket or apostrophe + S)

] or 'Z

AS (right bracket or apostrophe + Z)

%

Insert contest number. This number increments by one after every complete log entry. Set the starting point by using File, Settings, Station, Code in CommCat.

 

 

If you are using CommCat and CommCat Live, you can also send voice macros when operating phone.